Product Description
MS26 elastic adhesive is an elastic adhesive prepared based on special copolymerization modified organic silicone rubber resin with other special active additives.
The cured colloid is strong and elastic, and has excellent mechanical properties, such as tensile properties, elongation, shear strength, adhesion and aging resistance.
| Application: Adhesive or sealant |
| Special application: Flooring laying and installation |
| Unique advantages: Quiet, waterproof, moisture-proof, anti-aging |
| Construction temperature: 5ºC~40ºC |
| Long-term temperature resistance: range -40ºC~90ºC |
| Gravity(g/cm3): 1.4 |
| Extrudability (g/5s): 150 |
| Skinning time (min): 45 |
| Hardness shore A : 45 |
| Tensile strength(MPa): 2.4 |
| Elongation at break %: 220 |
| 150ºC mass of lose%: 3% |
| Shelf life month: 12 |
| Construction instruction |
| The surface of the coated base must be dry and clean before gluing, and there are no cracks, sand, sand running, empty drums, and pollution problems. If there are any of these problems, they need to be cleaned up. |
| The ground flatness needs to meet the construction requirements. |
| Suitable for high temperature applications, temperature range -40~90ºC. |
| The construction temperature can not be lower than 13 ° C, but also pay attention to different materials have different temperature requirements. |
| Finished product protection: The floor can not be moved within 5-12 hours after paving, and it can be put into use after 24 hours. Keep plastic buckets and tools away from the floor to ensure that the floor is clean and clean. |
){kind=link}