Eco-Friendly Vinyl Tile Flooring Glue Lvt Flooring Adhesive

• Customization: Available
• Adhesion Strength: High Strength
• Adhesive Type: Water-Based Adhesives
• Model NO.: Z301
• Curing Time: Standard Curing
• Water Resistance: Indoor
• Application: Indoor
• Material: Water-Based Acrylic Adhesive
• Classification: Room Curing
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Main Agent Composition: Acrylic
• Morphology: Paste
• Color: White
• OEM: Available
• Annual Production: 100000.00mt
• Samples: Free Samples
• Package: Bucket
• Area: 35000sqm
• MOQ: 50buckets
• OEM MOQ: 2000PCS
• Transport Package: Seaworthy Package
• Specification: 21kg/bucket
• Trademark: SINOPEARL
• Origin: Made in China
• Production Capacity: 100000mt Per Year

Product Description

Product Description

LVT FLOORING ADHESIVE Z301 is a non-toxic, water-based acrylic adhesive designed for high-performance vinyl flooring

installations. This eco-friendly adhesive is completely solvent-free and meets zero-VOC standards as per SCAQMD Rule 1168. 

Engineered for superior initial grab strength, B301 also provides exceptional resistance to plasticizer migration, ensuring long

lasting bond integrity. Its advanced formula delivers smooth application, quick tack formation,minimal odor,and effortless

cleanup,making it ideal for professional flooring installations.

CHEMICAL &PHYSICAL PROPERTIES

Suitable for

office/Light commercial  Residential Hospital Heavy Commercial

Yes

Flooring types

LVT or LVP Sheet Vinyl

Yes

Applicable to the surface of the substrate

Concrete Plywood (APP Grade) OSB Underlayment Well-Bonded Vinyl Terrazzo Gypsum underlayment(Dry, above-grade applications only)

TROWEL RECOMMENDATIONS

1/16" x 1/32" x 1/32" U-Notch

Coverage: 220-260 square feet per gallon

INSTALLATION

Z301 evenly with the proper trowel as described. Flash time and working time are influenced by substrate porosity and atmospheric

conditions (i.e., temperature, humidity, and air movement).The higher the temperature,the lower the humidity;and the more porous

the substrate, the faster the flash time and the shorter the working time. For best results, maintain adhesive, floor covering,and

room at a stable temperature of 65°F to 95°F (18°C to 35°C) for 24 hours before and after installation. Flooring may be installed 

when the adhesive has flashed off sufficiently to prevent adhesive transfer to the fingertips, usually after 10-20 minutes for porous

substrates, or 30-60 minutes on non-porous substrates. Do not install flooring in wet adhesive on non - porous

substrates. Always follow the flooring manufacturer's installation guideline. Flooring must be installed within the working time, up

to 4 hours after flash time. Follow manufacturer recommendations for rolling and/or cross-rolling the flooring during installation. 

CURE TIME

Traffic: Normal traffic may resume after 24 hours. Avoid high rolling loads for 72 hours. Wet mopping can be done after 1 week. 

CLEANUP AND STORAGE

As you work, immediately clean any adhesive from resilient flooring using a clean, damp cloth. Immediately clean all tools and

equipment before adhesive cures.Follow flooring manufacturer's recommendation for cleanup. Use of mineral spirits or other

solvent may be needed to remove dried adhesive. Some flooring may not be compatible with solvents such as mineral spirits. The

product should be stored in the original container in a cool,dry place and out of direct sunlight. Do not allow product to freeze. If the

product should freeze, store at 75°F (25°C) until completely thawed, then thoroughly mix contents. Test carefully to ensure the

product performance has not been compromised.